|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
01-02-2005, 05:45 PM
|
#1 |
|
Member (8 bit)
Join Date: Mar 2001
Location: North Carolina
Posts: 195
|
AGP8x vs Pro
Was considering purchase of ASUS A7N8X-E Deluxe MB. For the video slot it says - 1 x AGP Pro/8X (1.5V only). Not sure about the emphasis on the 1.5V only. How can I determine if my video card will work in it? It is a Sapphire Technology with ATI Radeon 9600. Supposed to be compatible with AGP 8x/4x. (Currently running 4x on an older board.) Thanks.
|
|
|
|
01-02-2005, 05:50 PM
|
#2 |
|
Member (9 bit)
Join Date: May 2004
Location: Northville, Michigan
Posts: 430
 |
It'll work, don't worry.
|
|
|
|
|
01-02-2005, 05:52 PM
|
#3 |
|
Barefoot on the Moon!
Staff
Premium Member
Join Date: Aug 2002
Location: Northeastern USA
Posts: 13,285
|
On old boards, there used to be 3.3v slots and matching 3.3v cards. All video cards made in the last few years are 1.5v, so you don't have to worry too much about compatability.
The card in question will work.
__________________
There are two secrets to staying young, being happy, and achieving success. You have to laugh and find humor every day, and you have to have a dream.
|
|
|
|
|
01-02-2005, 07:59 PM
|
#4 |
|
Member (8 bit)
Join Date: Mar 2001
Location: North Carolina
Posts: 195
|
That's good news. Many thanks for the replies!
Anywhere, webwise, I can read up on this sort of subject matter? Couldn't find anything on a quick search of pemech - doesn't mean it isn't there. Thanks again. |
|
|
|
|
01-03-2005, 12:35 AM
|
#5 |
|
Barefoot on the Moon!
Staff
Premium Member
Join Date: Aug 2002
Location: Northeastern USA
Posts: 13,285
|
Take a look here: http://www.ertyu.org/~steven_nikkel/...atibility.html
|
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
