|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
03-04-2005, 04:26 PM
|
#1 |
|
Member (6 bit)
Join Date: Dec 2003
Posts: 43
|
Studio 8 Capture through USB
I have a Sony miniDVD camcorder with a USB port and would like to capture the video with Studio 8 (instead of using Sony's Image Maker). The Sudio 8 HELP said capture is through Firewire. I can't get Studio to recognize the USB or a DVD through the DVD player/burner.
Any Help? Last edited by pierboy; 03-04-2005 at 04:54 PM. |
|
|
|
03-04-2005, 04:54 PM
|
#2 |
|
Audio/Video Expert
Join Date: Jul 2003
Location: West Michigan
Posts: 1,625
|
That camcorder should have a IEEE1394 port on it as well - Sony labels it iLink but it's the same as firewire (and it's all IEEE1394).
You'll get a much higher transfer rate using IEEE1394 as well (even over USB2 since USB standards share bandwidth over all ports).
__________________
Dave. Go where there is no path and leave a trail. |
|
|
|
|
03-04-2005, 04:59 PM
|
#3 |
|
Member (6 bit)
Join Date: Dec 2003
Posts: 43
|
No ILink found
Don't think it has the firewire port. The manual doesn't mention one either. The Camcorder model is SONY DCR-DVD101.
|
|
|
|
|
03-04-2005, 05:10 PM
|
#4 |
|
Audio/Video Expert
Join Date: Jul 2003
Location: West Michigan
Posts: 1,625
|
My bad - it's a DVD handycam. Why even bother with streaming from the camera? Just rip the audio and video from the DVD and import into Studio. And that camera is only USB1.1 capable - the best video streaming you'll get from it is 320x240. That's less than half DVD quality.
|
|
|
|
|
03-04-2005, 05:58 PM
|
#5 | |
|
Member (14 bit)
Join Date: Feb 2000
Location: Offenbach/Main (Germany)
Posts: 8,485
 |
Quote:
RJ
__________________
All's right with the world when your PC is working right. 
|
|
|
|
|
|
03-04-2005, 06:19 PM
|
#6 |
|
Member (6 bit)
Join Date: Dec 2003
Posts: 43
|
Please Excuse My Ignorance
How do I rip from the DVD and then import? I've been trying and can't figure that out. I called Sony's tech support but was unable to get the help I needed there. Do I need additional software? If so is there anything outthere thats free.
Thanks Last edited by pierboy; 03-04-2005 at 06:21 PM. |
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
