|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
11-25-2005, 05:43 PM
|
#1 |
|
Member (5 bit)
Join Date: Aug 2004
Posts: 19
|
ram stick and monitor problem
took out my ram stick to double check which to get. Put it back in.Now my monitor stays black and green light blinks.Computer sounds like it is up. Have made sure stick was in properly already. What else to do?
|
|
|
11-27-2005, 08:16 PM
|
#2 |
|
Served with Pride
Staff
Premium Member
Join Date: Apr 2003
Location: near the left coast of Michigan
Posts: 14,536
 |
If all you did was remove the ram module, then logically something has to be wrong with the reinstallation. Recheck that the slot/key are oriented correctly and that the both ends are fully seated allowing the end clamps to insert in the notches. If all is well there, check for something else you may have bumped or loosened. Like a hard drive ide cable or video card.
__________________
Computers have enabled people to make more mistakes faster than almost any invention in history, with the possible exception of tequila and hand guns. |
|
|
|
11-27-2005, 09:04 PM
|
#3 |
|
Member (14 bit)
Join Date: Mar 1999
Location: Christmas, Florida
Posts: 10,654
|
is it possible that you did not use proper ESD grounding and touched the stick of ram improperly and may have destroyed the ram ?
this could also be the problem which you described. |
|
|
|
11-28-2005, 01:58 PM
|
#4 |
|
Served with Pride
Staff
Premium Member
Join Date: Apr 2003
Location: near the left coast of Michigan
Posts: 14,536
|
No cross posting please. One thread per topic/problem.
http://forum.pcmech.com/showthread.php?t=145875 Closing this one. |
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
