|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
01-30-2008, 09:21 PM
|
#1 |
|
Member (5 bit)
Join Date: Jan 2008
Posts: 22
|
video card sli ready help
BIOSTAR V7302GS56 GeForce 7300GS 512MB 64-bit GDDR2 PCI Express x16 SLI Supported i buy 2 of this cards and don't have conector to brige 2 video cards the instructions said the video cards needs to be conected togeter so how you can conect both. please help
|
|
|
|
01-30-2008, 09:27 PM
|
#2 |
|
Member (5 bit)
Join Date: Jan 2008
Posts: 22
|
i'm building my dream machine but so far i don't know how to conect this 2 video cards sli ready did't came with extra cables by the way the instructions said this video card don't need brige just plug in both
|
|
|
|
|
01-30-2008, 09:29 PM
|
#3 |
|
I like me
Join Date: May 2007
Location: Tejas
Posts: 7,332
|
So have you tried to just plug both into your mother board?
Does your mother board and power supply support sli?
__________________
It's coming....just you wait. |
|
|
|
|
01-30-2008, 09:31 PM
|
#4 |
|
Member (12 bit)
Join Date: Dec 2007
Location: Calgary, Alberta, Canada
Posts: 2,357
|
Most of the higher end video cards made using the nvidia chipset have a connector at the top of the video card since the pci-e bus didn't have enough bandwidth for the cards to communicate with each other. The lower end video cards like the 7300GS will work without a connector because they don't need the additional bandwidth. If you had a used a higher end card like the 7600GT which has the required connection on the card, you could either run them in sli without the connector and have slower performance, or use the SLI bridge that came with the motherboard to connect them and increase performance.
|
|
|
|
|
01-30-2008, 09:33 PM
|
#5 |
|
Member (5 bit)
Join Date: Jan 2008
Posts: 22
|
yes i have the motherboard MSI K9A2 PLATINUM W/QUAD PROCESSOR PHENOM 9500 THE INSTRUCTIONS SAID I WILL SUPPORT SO LET ME TRY THANKS
|
|
|
|
|
01-30-2008, 09:36 PM
|
#6 |
|
Member (5 bit)
Join Date: Jan 2008
Posts: 22
|
so just need to plug in both in pci ex. and reboot the pc!!!!
|
|
|
|
|
01-30-2008, 09:42 PM
|
#7 |
|
Member (5 bit)
Join Date: Jan 2008
Posts: 22
|
question what is the minimum wats of power supply to run sli video cards my is 500w
|
|
|
|
|
01-30-2008, 11:07 PM
|
#8 |
|
Member (12 bit)
Join Date: Dec 2007
Location: Calgary, Alberta, Canada
Posts: 2,357
|
For lower end video cards like the 7300GS, 500W should be fine.
|
|
|
|
|
01-31-2008, 08:57 PM
|
#9 |
|
Member (5 bit)
Join Date: Jan 2008
Posts: 22
|
thank you
|
|
|
|
|
02-03-2008, 04:54 PM
|
#10 |
|
Member (4 bit)
Join Date: Feb 2007
Location: Penfield, NY
Posts: 12
|
when I did my SLI, the bridge connector came with my MOBO, not the graphics card. Mine is ASUS M2N-E SLIa nd the vid card are 7600. SLI works great
|
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Installed new video card - getting weird messages. | dana7210 | Home Theater, Audio, and Video | 0 | 11-19-2006 11:42 PM |
| Can I install a PCI video card in a PCI Express slot ready comp. | phantomtres | Home Theater, Audio, and Video | 2 | 07-16-2005 12:04 PM |
| SLI compatability with only one video card. | guy3004 | Computer Hardware | 1 | 07-07-2005 10:34 PM |
| Video Card for Abit BE6-II v 1.1 | truearrow | Home Theater, Audio, and Video | 8 | 04-22-2004 05:37 AM |
Linear Mode
