|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
08-24-2009, 10:04 AM
|
#1 |
|
Member (6 bit)
Join Date: Jan 2005
Posts: 32
|
No Video on bootup
Hello all
I have and emachine desk top model T2825. I have no video on bootup. I've tried replacing my monitor with a known good one with no change. I just get that message on the monitor that no signal is present. Now once in in a great while the video will show up on a reboot and go about a day and quit working again. Is this a problem with the video driver or the BIOS? I know I probably should just go out and get another computer but if there is an easy/cheap fix I would like to know. Thanks |
|
|
|
08-24-2009, 07:05 PM
|
#2 |
|
Wrench Bender
Join Date: Dec 2002
Location: Plymouth,MN
Posts: 5,949
|
A more likely cause is a PSU that is starting to die. A PSU in e-machines dieing is fairly common. And the bad part is that when a PSU dies in e-machines it tends to take out the motherboard.
__________________
"When sliding down the banister of life; look out for splinters pointing up."
|
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
