|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
04-14-2003, 06:56 AM
|
#1 |
|
Anime:Any-may
Join Date: Sep 2002
Location: Kota Bharu, Malaysia
Posts: 2,447
|
overclocking 3d cards?
I have a 3d card gf2 ti that alows me to tweak. There tweakables are:
1. memory clock 2. core chip clock 3. core 4. memory 5. fan speed(the heat sink fan) Then there are some graphs dosplaying the settings: memory, v-ref, core and tempreature. So which want do I tweak so that I get the most. I tried everything at max- the pc froze/the graphics were chunky.
__________________
CPU: Intel E-5200. Graphics: Saphire Radeon 4770 HD 512 MB. Motherboard: Gigabyte GA-EP43-DS3L. Memory: Corsair XMS2 Xtreme Performance 4 GB ( 2 x 2 GB ), Chasis: Antec Three Hundred. PSU: Corsair CX400W. Optical Drive: Sony Optiarc SATA DVD +-RW. Storage: Seagate Barracuda 7200.12 500GB SATA. Peripherals: Dell E1905EP 19" UltraSharp LCD; LG M227WD (Dual screen), HP 4180 Printer, Canon S400SP Printer & Lide20 Scanner; Philiphs HP 890, Edifier MP230. OS: Win 7 (64 bit). Laptop: Toshiba Satellite M50 |
|
|
|
04-14-2003, 10:16 PM
|
#2 |
|
Computer Slave
Join Date: Oct 2001
Location: Connecticut
Posts: 1,564
 |
Start by upping the memory clock speed and the core clock speed. Go up a little bit at a time and stop/clock back when you start to see any glitches in graphics or you're getting lockups.
|
|
|
|
|
04-17-2003, 11:03 PM
|
#3 |
|
Anime:Any-may
Join Date: Sep 2002
Location: Kota Bharu, Malaysia
Posts: 2,447
|
Well if I adjust the speed to high-it will return to the previous settings. Now there is also another thing i can change-the core and memory. The numbers are as follows
core-2.05 memory-2.45_I can change this as well. Do I increase this-or just leave it alone? |
|
|
|
|
04-17-2003, 11:17 PM
|
#4 |
|
Computer Slave
Join Date: Oct 2001
Location: Connecticut
Posts: 1,564
|
I think those are the core/memory voltages? What you want to change is the core and memory clock speed. Are you running a program in order to change the clock frequencies or using some other method?
|
|
|
|
|
04-18-2003, 07:58 AM
|
#5 |
|
Member (11 bit)
Join Date: Aug 2001
Location: Brooklyn Park,Minn.
Posts: 1,864
|
if you what to overclock your card try coolbits
http://www.overclockers.com.au/techstuff/a_coolbits/ wolfie |
|
|
|
|
04-19-2003, 12:20 AM
|
#6 |
|
Anime:Any-may
Join Date: Sep 2002
Location: Kota Bharu, Malaysia
Posts: 2,447
|
Yup-its a program that comes with the gf2 ti. I'm not sure its the voltage-it needs 3v-what I've seen on the card.
|
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
