|
|||||||
![]() |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
|
|
#1 |
|
Folding For PCMech
Join Date: Jun 2003
Location: San Dimas, CA
Posts: 3,136
|
DSL Speed Test
I'm interested in doing a speed test for my DSL and seeing if I'm getting the fullest out of my connection.
Does anybody know of any sites or programs that would allow me to do this? TIA |
|
|
|
|
|
#2 |
|
Member (12 bit)
Join Date: Jan 2002
Location: Central Arkansas
Posts: 2,170
|
__________________
Roger "Our greatest glory is not in never falling, but in rising every time we fall." -Confucius |
|
|
|
|
|
#3 |
|
The Preacher Man
Premium Member
Join Date: Apr 2000
Location: Dallas
Posts: 4,710
|
__________________
The bigger the government, the smaller the citizen |
|
|
|
|
|
#4 |
|
Folding For PCMech
Join Date: Jun 2003
Location: San Dimas, CA
Posts: 3,136
|
Thanks for both links guys.
Sarge, I ran the tweak test, and I'm looking through the FAQ that was linked to on the page that I got after completing the test, but I have no clue about what to do with these tweaks. Could you give me a few pointers? |
|
|
|
|
|
#5 |
|
Retired
Join Date: Apr 2000
Location: Modesto,Calif
Posts: 4,042
|
bigandy,
What results did you get from the tweak test? RWIN settings, etc? Download DrTCP from the tweak test page and it will help you tweak your DSL. Carl |
|
|
|
|
|
#6 |
|
Folding For PCMech
Join Date: Jun 2003
Location: San Dimas, CA
Posts: 3,136
|
Kubie, I downloaded DrTCP, but I'm still clueless (forgive me, I'm an idiot)
First, for connection, do I put "normal" or "WinXPppoe" or what. For normal, this is what I get: Receive Window (RWIN): 64800 Window Scaling: off Path MTU Discovery: ON RFC1323 Window Scaling: OFF RFC1323 Time Stamping: OFF Selective Acks: ON MSS requested: 1440 TTL: unknown TTL remaining: 113 ------------------------------------------------- Actual data bytes sent: 160400 Actual data packets: 112 Max packet sent (MTU): 1480 Max packet recd (MTU): 1480 Retransmitted data packets: 10 sacks you sent: 28 pushed data pkts: 6 data transmit time: 1.150 secs our max idletime: 134.5 ms transfer rate: 85932 bytes/sec transfer rate: 687 kbits/sec transfer efficiency: 91% For WinXPppoe, this is what I get: Receive Window (RWIN): 64800 Window Scaling: off Path MTU Discovery: ON RFC1323 Window Scaling: OFF RFC1323 Time Stamping: OFF Selective Acks: ON MSS requested: 1440 TTL: unknown TTL remaining: 113 --------------------------------------- Actual data bytes sent: 160400 Actual data packets: 112 Max packet sent (MTU): 1480 Max packet recd (MTU): 1480 Retransmitted data packets: 10 sacks you sent: 28 pushed data pkts: 6 data transmit time: 1.150 secs our max idletime: 134.5 ms transfer rate: 85932 bytes/sec transfer rate: 687 kbits/sec transfer efficiency: 91% TIA Last edited by bigandy; 01-10-2004 at 11:37 PM. |
|
|
|
|
|
#7 |
|
Member (10 bit)
|
Just for your info, if ya use a proxie or AdSubtract disable it before doing any testing there because it won't be the right #'s. but they tell you that if you read all the before you run the test stuff.
Don |
|
|
|
|
|
#8 |
|
Retired
Join Date: Apr 2000
Location: Modesto,Calif
Posts: 4,042
|
bigandy,
PPPOE cause you have SBC, right? After you ran the tweak test, at the bottom of the screen where you d/l'd DrTCP, there should have been suggestions for you to do. Like what your rwin should be etc. Were there any triangles with an exclamation mark in them? Carl Last edited by Kubie; 01-11-2004 at 01:01 AM. |
|
|
|
|
|
#9 |
|
The Preacher Man
Premium Member
Join Date: Apr 2000
Location: Dallas
Posts: 4,710
|
Change the RWIN to 37752 for starters and the MSS to 1492.
|
|
|
|
|
|
#10 |
|
Member (13 bit)
Join Date: Nov 1999
Location: Mt Washington, KY
Posts: 4,927
|
Also try www.pcpitstop.com
Chas
__________________
I may not be much, but I'm all I think about. |
|
|
|
|
|
#11 |
|
Folding For PCMech
Join Date: Jun 2003
Location: San Dimas, CA
Posts: 3,136
|
Sorry for not posting back for so long.
Sarge, I changed the RWIN to 37752, but where exactly would I find and change the MSS number? Kubie, no, there where not any of the triangles. I went through the FAQ like you suggested Kubie, and I think I understand most of the settings now. Thanks for the link Chas, I'll check that site out a little more in-depth later on. Thank you guys! |
|
|
|
![]() |
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|