|
|||||||
![]() |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
|
|
#1 |
|
Member (1 bit)
Join Date: Dec 2004
Posts: 1
|
SBC-DSL + DI-614+ problem.
I've been having problem of lost connection since I have SBC DSL hooked up. Here's some detail:
1. Windows XP Pro 2. SBC DSL recently connected 3. Wireless router: DLink DI-614+ It happens quite frequently around 3-4 times/day. I can make it re-connect by unplug my router (DI-614+) and plug it back. After the router reboot, the connection will work (I didn't touch DSL modem). I used Comcast cable before DSL which didn't give me any problem like this. Is there any setting that I need to make to my router? Or is there any confliction between DI-614+ and SBC DSL. Thanks in advance. |
|
|
|
|
|
#2 |
|
Forum Administrator
Staff
Premium Member
Join Date: May 2000
Location: Joplin MO
Posts: 36,460
|
Check the PPPoE settings, they should be set to keepalive, not dial on demand. Also experiment with the MTU settings, they should be no higher than 1492, you may have to go as low as 1400.
|
|
|
|
![]() |
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|