|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
04-10-2006, 05:40 PM
|
#1 |
|
usual suspect
Join Date: Jun 2002
Location: not here
Posts: 2,051
|
sync three networks to one ethernet time server
i have three separate networks all with different ip's (they have to be kept like this). i have one time server right now controlling one of the networks. what i would like to do is have that time server control all of them, if possible.
i have this time server, and it has a 10.1.xxx.xxx ip right now. what would i have to do to get this time server working on all the networks. the way i thought of was to put a nic in one of the comps in each of the networks and make it a 10.1.xxx.xxx address, but i didn't know how we would then relay that to the rest of the computers in the network thanks craig
__________________
the universe is against this current wave of success i'm having. -johnny drama, entourage |
|
|
|
04-11-2006, 02:03 PM
|
#2 |
|
Member (9 bit)
Join Date: May 2000
Location: Lexington, Michigan
Posts: 353
|
Assuming that all the networks are on differnet subnets, you either add
a layer 3 device (switch or router)to do the routing between subnets. Or you could add 2 more nics into the time server so that it could see the other 2 networks.
__________________
Certifiable =========================================== Cisco CCNA,CCDA CompTIA A+, Network+,Inet+,Security+ CIW Associate IBM AIX certified IBM Certified Specialist - p5 and pSeries Administration and Support for AIX 5L V5.3 IBM Certified Systems Expert - p5 and pSeries Enterprise Technical Support AIX 5L V5.3 |
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
