|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
11-01-2001, 05:27 PM
|
#1 |
|
Member (2 bit)
Join Date: Nov 2001
Location: UK
Posts: 2
|
Networking NT with Win95
Hi Their,
I have got NT Server on one of my PC and Windows 95 on a laptop and on a PC installed. I have got Network cards in my PCs and PCMCIA in my Laptop and three of them are connected through a Hub. When I ping from laptop to NT Server PC and from PC to laptop I get the message Request timed out. Could you please advise me how can can I get my Nwtwork up and running and poing me to a right direction. Thanks in advance |
|
|
|
11-05-2001, 12:28 PM
|
#2 |
|
Member (12 bit)
Join Date: Sep 2001
Location: Racine, WI
Posts: 2,094
  |
If you are using TCP/IP protocol on your newtwork, check to see if you have a conflicting address between your laptop and any of your other desktops. Are you able to log on to your network when you bring up windows? Check by opening network neighborhood, and see if you can see your server and other PCs. If not, you need to determine if your PCMCIA card is good, and also check your network settings.
I run a few win95 machines on my NT and 2000 servers, so any more questions and I could look into it for you. NAte |
|
|
|
|
11-06-2001, 09:01 PM
|
#3 |
|
Member (2 bit)
Join Date: Nov 2001
Location: Good Ol' US of A
Posts: 2
|
Just curious what networking protocols you have installed on both machines. And what the properties you have listed under TCP/IP.
|
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
