|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
03-28-2009, 01:50 PM
|
#1 |
|
Member (8 bit)
Join Date: Mar 2001
Location: Central Arkansastan
Posts: 247
 |
Slaving a HDD problem
I bought a kit to slave a HDD. After reading the sticky about how to, I did exactly what it said, however after hooking it up, it did its 'found new hardware' thing, then I hooked the HDD to it, but never saw it. I can hear the drive running and clicking (it has a power supply for the drive). I then went to my other computer, and it did exactly the same thing. However, when i hooked the Drive as a second drive in either of the computers, it see's it just fine, and I can access it. I tried jumpering as slave, master, and CS, with no results. Am I doing something wrong?
__________________
AMD FX4170 ASUS M5A97 16GB 1600 Ram SSD-Intel (Main OS) WD Caviar (Spin Drive for Junk) SSD-Corsair (For OS Backup) EVGA 550Ti A Shovel and a 55-Gallon Drum can solve many of life's little "Issues"...... |
|
|
|
03-28-2009, 05:36 PM
|
#2 |
|
Member (12 bit)
Join Date: Jul 2002
Location: Illinois
Posts: 3,557
|
What type/brand of kit? What brand of hard drive?
|
|
|
|
|
03-28-2009, 08:25 PM
|
#3 |
|
Forum Administrator
Staff
Premium Member
Join Date: May 2000
Location: Joplin MO
Posts: 41,184
|
Connect the hard drive to the adapter and apply power. Start the computer, and when it's in Windows, connect the USB cable. If it doesn't work, the adapter is defective.
|
|
|
|
|
03-28-2009, 09:02 PM
|
#4 |
|
Member (8 bit)
Join Date: Mar 2001
Location: Central Arkansastan
Posts: 247
|
Must be defective. It made no difference.
|
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
