|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
06-28-2000, 11:36 PM
|
#1 |
|
Member (6 bit)
Join Date: Apr 1999
Location: tokyo Japan
Posts: 57
|
If I have three computers in seperate rooms
and all the cablesgoing into a patch panel what do I plug into the patch panel.I have a Six port hub do I plug this in and where do I plug the server into in. All the software already has been config,Im just moving the lan. Please help |
|
|
|
06-29-2000, 05:34 AM
|
#2 |
|
Member (9 bit)
Join Date: May 2000
Location: Lexington, Michigan
Posts: 353
|
plug the cable runs from the patch pannel into hub using patch cables (short pieces of cabling between hub and patch pannel) If the server sits in same room as hub, cable it directly to the hub otherwise patch it in same as above
------------------ Hmmmm, Never saw that happen before. |
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
