|
|||||||
![]() |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
|
|
#1 |
|
Member (2 bit)
Join Date: Mar 2005
Posts: 3
|
Pc Wont Start
the screen got frozen when i was playing CS, I could not do anything so i turned it off. Then I tried to turn it back on, nothing happens accept all fans spin for 1 or 2 seconds. all i see is a little light near the memory slot ( using an Intel mobo ). Please help !!!
THANK YOU |
|
|
|
|
|
#2 |
|
Barefoot on the Moon!
Staff
Premium Member
Join Date: Aug 2002
Location: Northeastern USA
Posts: 13,384
|
What are your system specs? Or is it a brand-name computer?
Try reseating the RAM and video card.
__________________
There are two secrets to staying young, being happy, and achieving success. You have to laugh and find humor every day, and you have to have a dream.
|
|
|
|
|
|
#3 | |
|
Member (2 bit)
Join Date: Mar 2005
Posts: 3
|
Quote:
Intel® Desktop Board D925XECV2 1 Gig kingston memory CPU 3.2 6600 GT vid 74 G raptor hdd |
|
|
|
|
|
|
#4 |
|
Served with Pride
Staff
Premium Member
|
Process of elimination without spending money is the best way. Some things to try: Remove one stick of ram and see if it will boot, if not switch sticks (assuming you are running two), test the memory with a boot floppy of Memtest86+, test the hard drive with Western Digital's diagnostic/testing software (available at their site or it came with your hdd if purchased Retail). Try a different vid card.
|
|
|
|
|
|
#5 |
|
Member (2 bit)
Join Date: Mar 2005
Posts: 3
|
ok this weird thing happens, after reseating everything I powered it up, nothing happened. 5 min later i powered it up again, something burns but i don't know which, i can smell it. then i turned it on again even I know my comp is dead for sure, but this time the rear fan (connected to the board), video card fan, cd rom runs but the cpu fan did not run, nothing on screen. So from your point of view, which one is dead CPU or Mobo ??
|
|
|
|
|
|
#6 |
|
Served with Pride
Staff
Premium Member
|
May be that the cpu fan died and the connector on the mobo detects the lack of a fan turning and has shut down to protect the system.
|
|
|
|
![]() |
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|