Acronis Trueimage 8

[jdb691rx]

Can anyone tell me if Acronis Trueimage 8 will work with two serial hard drive in a raid array?

Thanks in advance

Jack

[Panama Red]

Guess I'm confused. Trueimage is designed to provide a backup image of your hard drive. What type of Raid configuration are you referring to? A Raid 1 configuration would provide a constantly upgraded backup image on the second hard drive.

[jdb691rx]

Thanks for the reply. I am running the two serial hard drives in "raid 0" (striped)
I have e-mailed Acronis, and got the reply I have pasted below.
Thanks for your reply.

Hello,

Thank you for the interest in Acronis software (http://www.acronis.com/homecomputing/products/).

When Acronis True Image/Server is running under Windows, then it works with all the hard disk drives detected by the operating system. If Acronis True Image/Server is running in rescue mode (e.g. to restore the system partition), then the following RAID controllers are supported:

- P-ATA (IDE) RAID controllers (Promise, Highpoint)
- Most of SCSI RAID controllers (Adaptec, Dell, LSI and others)
- SATA RAID controllers (Highpoint, Intel, Promise, Silicon Image)

Some other RAID controllers may be supported as well, although we have not tested them yet, and the others will be supported with the future updates.
--
Best regards,
Timur Bagramov

Acronis, Inc.