nero audio cd

[hobey19]

using nero 5.5, hodo i burn an audio cd with 0 second in between songs, rather than the normal two seconds? thanks

craig

[regans cortina]

ive tried this. the closest i can get is 0.1 second gap. when u have dragged your mp3,s over to the left, right click on one of them and select all, then do the same again , but this time select properties. now a box will pop up . look for the pause box . then change the second gap , and apply !! experiment yourself, see if you can get it closer !!! remember to select all when changing this, otherwise it will only change teh pause if one song !! hope this helps.

[chip]

Not familiar enough with Nero, but Easy Cd Creator has a transition affects option where you can select the gap (or not) between songs or crossfade one song into the next.

[hobey19]

should i be using track at one or disc at one bc when i click burn, i get an error saying that the pause has to be at least 2-3 seconds in this mode. thanks


craig

[Rick Hall]

When you use the properties for your music files in Nero, you can remove the 2 second gap. You must leave the 2 second gap at the beginning of the first track only. This does not affect your music since you will not notice this gap on the first track.

Once you have your compilation, you can select your files and right click. Now go to properties. Under Track Properties set the Pause to 0 for all tracks except the first track, leave a 2 second pause at the beginning of the first track

You may also want to go into filters at this time and put a check in the normalize box (making sure that you are using RMS at 20%. I personally use 15%.

[reboot]

Use Disk at Once to burn, and make sure you "finalize" the CD.