|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
04-28-2003, 01:02 PM
|
#1 |
|
Member (5 bit)
Join Date: Mar 2000
Location: UK
Posts: 23
|
Hauppauge WinTV-pci PVR
I am operating Windows ME on a 1.4 athlon processor. I have loaded the above software and ALL up todate drivers.
When I turn the TV on the picture freezes (and my pc also) anywhere between after 5mins and 2 hours. However the audio is still there. I have moved the hardware to several different slots, but still the problem occurs. I have adjusted Latency settings as indicated by Hauppauge and have exhausted their advice with no luck. Anybody out there had/has a similar problem. 
|
|
|
|
04-30-2003, 07:33 PM
|
#2 |
|
Member (9 bit)
Join Date: May 2000
Location: Lexington, Michigan
Posts: 353
|
i had the usb version of that tuner. when i built a new pc with a abit board and that same 1.4 processor, i could never get it to work, had pretty much the same problems that you did. followed all the suggestions on their site and never could get it to work, apparently it has issues with via based boards and/or amd chips. next upgraded to an asus board with a p4 processor, tuner worked flawlessly.
never did solve the problem with the abit board and amd chip
__________________
Certifiable =========================================== Cisco CCNA,CCDA CompTIA A+, Network+,Inet+,Security+ CIW Associate IBM AIX certified IBM Certified Specialist - p5 and pSeries Administration and Support for AIX 5L V5.3 IBM Certified Systems Expert - p5 and pSeries Enterprise Technical Support AIX 5L V5.3 |
|
|
|
|
05-01-2003, 07:26 AM
|
#3 |
|
Member (13 bit)
Join Date: Nov 1999
Location: Mt Washington, KY
Posts: 4,927
|
I have the same problem with a PC running WIN XP and a ATI TV tuner card. Have to do a reset as both mouse and keyboard are locked. Sorry I cain't be of help, just wanted to let you know that you are not alone.
Out of curosity what mobo are you running and what chipset? Chas
__________________
I may not be much, but I'm all I think about. |
|
|
|
|
05-01-2003, 11:31 AM
|
#4 |
|
Member (5 bit)
Join Date: Mar 2000
Location: UK
Posts: 23
|
Using an asus board with Ali M1647 chipset.
Been told to change slot so it has it's own irq.??? Do I do this through trial and error. |
|
|
|
|
05-01-2003, 11:50 AM
|
#5 |
|
Forum Administrator
Staff
Premium Member
Join Date: May 2000
Location: Joplin MO
Posts: 37,786
|
With ACPI running the show, trying to get it on its own IRQ can be difficult, if even possible. One slot that is a definite no-no is PCI 1 (next to the AGP slot).
|
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
