|
|||||||
![]() |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
|
|
#1 |
|
Member (7 bit)
Join Date: Apr 2006
Posts: 109
|
Hey,
Okay, so I know what happened is my fault, but I would like to get this resolved. I have a Dell 5160 laptop. I dont want to get rid of it because it is blazing fast with performance. However, being that it is a laptop, I use it sometimes when I am lying in bed. The problem is that the cord that recharges the laptop via the back port ultimately connecting to the MB has "made it self loose", so that when I simply try to plug it in for a recharge, it wont unless I "strategically" angle the cord to hit the precise spot. Even then, it will need to be adjusted in order for me to have it fully recharged. I am out of warranty (by less than a year, ugh) and have contacted dell and they want $250 to replace the entire MB (which they say is the only option) because the recharge piece is soldiered onto the MB. I went to ebay and the MB for 5160 go for the same price. Is there an easier way for me to get this serviced? I have electrical experience (somewhat) and just dont want to pay $250. Is there a place that sells the recharge part of the MB, which is all that I need, instead of a new MB? Any ideas/suggestions would be great. Thanks in advance.
__________________
AMD Athlon 64 3200+ Venice 2000MHz CORSAIR ValueSelect 1GB (2 x 512MB) MSI NX7600GS-T2D256E GeForce 7600GS Foxconn NF4SK8AA-8KRS Socket 939 NVIDIA nForce4 SLI ATX COOLER MASTER Centurion 5 CAC-T05-UW Aluminum Bezel BenQ FP91G+ 19"LCD Monitor NEC 16x DVD +/- DVD Burner SONY DVD-ROM 48x/16x SEAGATE Barracuda 7200rpm 250g HD BELKIN Wireless Keyboard / Optical Mouse ANTEC TruePower II 430w Dual ATX12v Power Supply |
|
|
|
|
|
#2 |
|
Wrench Bender
Join Date: Dec 2002
Location: Plymouth,MN
Posts: 5,961
|
You may be able to find a replacement plug socket at a commercial electronic supply company like Newark or Allied Electronics but the socket on the mother board could be exclusive to Dell. Also, depending on the reason for the bad connection, it may not be repairable(like traces broke on the board itself).
__________________
"When sliding down the banister of life; look out for splinters pointing up."
|
|
|
|
|
|
#3 |
|
Moderator
Staff
Premium Member
|
http://www.doctorlaptop-repair-jack.com/
Keep in mind that this will require some technical know-how and a soldering iron.
__________________
Computer: Intel Core i5-750 2.66 GHz quad-core processor @ 3.71 GHz | Asus P7P55D-E motherboard | Crucial 4 GB DDR3-1333 RAM | nVidia GeForce 8600GT | 2x WD Caviar Black WD1501FASS 1.5TB hard drives in RAID 1 | Antec Sonata III case with Antec EarthWatts 500-watt PSU | Dual Dell UltraSharp 2408WFP 24" widescreens | Windows 7 Ultimate 64-bit Other: 2005 Subaru Legacy 2.5GT sedan 5MT | Samsung Epic 4G Smartphone | Mamiya M645 1000S medium-format SLR with 55mm f/2.8, 70mm f/2.8, 210mm f/4, teleconverter, 120 and 220 film backs | Olympus E-PL1 Micro-4/3s DSLR with 14-42mm and 40-150mm lenses |
|
|
|
|
|
#4 | |
|
Member (7 bit)
Join Date: Apr 2006
Posts: 109
|
Thank you, I will look into this.
Quote:
|
|
|
|
|
![]() |
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|