|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
08-07-2006, 03:55 PM
|
#1 |
|
Member (9 bit)
Join Date: Oct 2001
Posts: 481
|
Averatec 3700 Series Laptop.
Hi Gang! any of you have any experience opening an averatec 3700 laptop.
I wanted to swap out the hd with a bigger hd. The problem is even when I take out all of the screws it still wont give me access to the area where I need to take out the HD. Any help is geatly appreciated. Thanks.
__________________
Pentium D 3.0Ghz eVGA 7800 GTX KO PCI-E 1024 DDR2 Twin X2 Corsair Mathed Memory PC5300 Gigabyte GA-G1975x Mobo Creative X-Fi Platinum Maxtor 300gb Sata2 HD Win XP Pro SP2 |
|
|
|
08-07-2006, 04:34 PM
|
#2 |
|
9mm wins.
Join Date: Dec 2002
Location: Behind my Glock 34.
Posts: 4,544
|
I just checked your manual but nothing about swapping out the HDD.
If you can't find where the HDD bay is externally from the sides or the bottom of the laptop, it is probably under the keyboard. This requires more work and may be more difficult. I don't recommend doing the procedure unless you know what you are doing. |
|
|
|
|
08-07-2006, 04:51 PM
|
#3 |
|
Member (12 bit)
Join Date: Sep 2005
Posts: 2,509
|
See if this helps, might not be the same 3700 series that you have, but should be pretty similiar.
And looks a little complicated, be very carefull if you follow it so that you don't mess up any connections. Also if your Avertech is still under warranty, breaking the seal will void it. An authorized service center could do it for you and the warranty would still be good.
Last edited by jayb1234; 08-07-2006 at 04:56 PM. |
|
|
|
|
08-08-2006, 12:43 AM
|
#4 |
|
Served with Pride
Staff
Premium Member
Join Date: Apr 2003
Location: near the left coast of Michigan
Posts: 14,565
 |
Moved to Mobile Tech
|
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
