01-13-2007, 07:07 PM
|
#1
|
|
Member (9 bit)
Join Date: Mar 2004
Posts: 313
|
Help with setting primary monitor
Well, long story short, I accidently destroyed my notebook's screen and only have a 4x2in usable square of desktop. I tried hooking up an external monitor, and it works until windows loads, but then the signal apparently disappears. Only in SafeMode will the external screen continue to show anything. I also don't have another computer available to me.
So, with my limited amount of desktop realestate available to me, I was hoping someone could give me a keypress combination that will set the #2 monitor to primary starting once the "Settings" tab in the desktop properties has been opened. Or maybe someone has another suggestion?
Thanks!
-Dave
__________________
Thermaltake Swing | 550W Corsair PSU | Asus P5K DLX/WiFi | Intel C2D E8400 @ (???)ghz | 2x2GB G.Skill DDR2-1000 | eVGA 8800GT Superclocked | 400GB Seagate 7200.11 (32mb) | 20x ASUS DVD-RW with Lightscribe | 20x Samsung DVD-RW | Black Floppy (just in case) | 52-in-1 Card Reader | UV lights & cables
|
Enermax CS-800TA | 400Watt Antec PSU | Asus P4c800 Deluxe | P4 2.8c @ 3.5ghz | 2x512 KHX pc4000 | ATI 9800pro AIW 128mb | 120GB 7200RPM WD Hard Drive | 8x NEC DVDRW | 16x sony dvd-rom | sony silver floppy
|
|
|
|