|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
08-06-2004, 01:03 PM
|
#1 |
|
Member (4 bit)
Join Date: Jun 2003
Posts: 12
|
XP Not Installing
I, recentlly upgrade my computer with a new motherboard and process. The problem is windows xp will not install. I boot form the cd and evrything goes as it should unitl xp starts to install and I get this message
______________________________________ "Page_fault_IN_nonpaged_area the problem seems to be caused by the following file: setupdd.sys A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this stop error sscreen, restart you computer. If this screen appears again, folloe these steps: Check to be sure you have adequate disk space. If a driver is identified in the stop meessage. disable the driver cheeck with the manufacutrer for driver updates. Try changing video adapters. Check with your hardware vendor for any bios updates. Disable Bios Memory options , such as caching or shadowing. If you need to use Safe Mode to remove or disable components, resart your computer, press F8 to select advanced sartup option, and then select safe mode. Technical information" Stop: 0x0000008E (oxcoooooo5,oxf77d2off,oxf73d19bc,0x00000000) setupdd.sys - addres f77d20ff base at f779b000, datestamp 3b7d8507" ---------------------------------------------- P.S. I've tried to follow the instructtions as best i could but i'm lost I would appeciate some guidence. *ECU L7s7AC *AMD athlon xp 2600+ Last edited by Gemini82; 08-06-2004 at 01:24 PM. |
|
|
|
08-06-2004, 01:04 PM
|
#2 |
|
PCMech: Saving Lives
Join Date: Apr 2004
Location: England, the United Kingdom
Posts: 1,839
|
Are you running with any PCI cards? Try removing them. It could be the board, ECS in my experience have had all sorts of problems.
__________________
 |
|
|
|
|
08-06-2004, 01:12 PM
|
#3 |
|
Member (4 bit)
Join Date: Jun 2003
Posts: 12
|
I have two pci cards. On is the modem and the other is a video card. Unfortunatly, i can't take out the video card bucause i wont be able to view with my monitor.
|
|
|
|
|
08-06-2004, 01:15 PM
|
#4 |
|
PCMech: Saving Lives
Join Date: Apr 2004
Location: England, the United Kingdom
Posts: 1,839
|
I understand the video card, but what about the modem?
|
|
|
|
|
08-06-2004, 01:21 PM
|
#5 |
|
Member (4 bit)
Join Date: Jun 2003
Posts: 12
|
tried but no luck same problem
|
|
|
|
|
08-06-2004, 01:24 PM
|
#6 |
|
PCMech: Saving Lives
Join Date: Apr 2004
Location: England, the United Kingdom
Posts: 1,839
|
I found this: http://support.microsoft.com/default...;EN-US;Q315335
If you only have one memory module download memtest from http://www.memtest86.com/ and put it on a floppy and test the ram. |
|
|
|
|
08-06-2004, 01:29 PM
|
#7 |
|
Member (4 bit)
Join Date: Jun 2003
Posts: 12
|
I switched slots is it working ok so far
still same error Last edited by Gemini82; 08-06-2004 at 01:46 PM. |
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
