Two bootable drives w/drive letter issue

[videobruce]

I have 2 bootable drives (switchable, only one is active at one time). I made a image of the 2nd drive and saved it. I then copied that image to the first drive. Both drives boot ok and both drives are reconized in the Bios and Windows ok. Both drives switch ok (the correct drive boots (becomes a master ok).
Problem is no matter which one boots it retains the same drive name. IOW's I have one drive labeled Backup1 and the other Main1. Either way, for example Main1 is shown even though it's Backup1 that's active.
I ran into this before and forgot the fix. I tried to rename the drive but it doesn't do any good. I made changes to one drive's content so I can tell it apart (deleted some programs and changed the wallpaper and splash screen (separate subject on the splash screen, not a issue here).
It's not that the drives aren't booting to one I want, it's just the name of the drive stays the same. It's always dribve letter "C", but the same name remains.

Hope that made sense.

Running 2k w/sp4 and administrative rights. The image was done with a Ghost 2003 floppy.

[macko72]

http://www.winguides.com/registry/display.php/912/ try something like this!!!
Or this if drive letter is at stake http://support.microsoft.com/kb/q223188/ !!!

[videobruce]

Please reread, it's NOT the drive letters, it's the drive names!

[macko72]

You to 1st link is for drive names 2nd for drive letters.!!!