Go Back   PCMech Forums > Windows Support > Windows Legacy Support (XP and earlier)

Need Some Help? Type Your Keywords Here:

Reply
 
LinkBack Thread Tools Search this Thread Rate Thread Display Modes
Old 05-11-2005, 02:34 PM   #1
Member (9 bit)
 
hoemee's Avatar
 
Join Date: Jun 2001
Location: Maine
Posts: 310
dreaded blue screen

I am working on an old computer - 133mhz, Windows first edition, edo ram. On startup I noticed that it counts the ram 3 times and then boots. Then I get the blue screen:

Invalid VxD dynamic link from VDHCP(03) + 00002728 to device "VIP", service 12. Your windows config is invalid. Run the windows setup program again to correct this program. To continue running windows press Y......

I press yes and it boots o.k. and runs with no other problems.

I cannot run the setup again because I do not have a Windows first edition disc. I have a Win 98se disc, but it won't let me run it because it is a later edition than what is installed on the computer.

Any ideas?

Thanks,

Steven
hoemee is offline   Reply With Quote
Old 05-12-2005, 04:09 PM   #2
Member (8 bit)
 
Join Date: Apr 2005
Posts: 207
How long has it been since this thing has been booted? W95 FE? Might be a Y2k update problem. (Y2k...year 2000)
Digitalic is offline   Reply With Quote
Old 05-12-2005, 06:32 PM   #3
glc
Forum Administrator
Staff
Premium Member
 
glc's Avatar
 
Join Date: May 2000
Location: Joplin MO
Posts: 37,791
Remove all networking components and uninstall the network adapter. NOTE that you will need the Windows distribution CD/disks if the cab files aren't on the hard drive to reinstall networking..
glc is offline   Reply With Quote
Old 05-12-2005, 11:04 PM   #4
Member (9 bit)
 
hoemee's Avatar
 
Join Date: Jun 2001
Location: Maine
Posts: 310
Digitalic - I am using Win98 first edition

Glc - I tried to uninstall the network adapters in Device Manager, but it will not remove them. I also tried in control panel - it removes them initially, then they return.
hoemee is offline   Reply With Quote
Old 05-13-2005, 12:16 AM   #5
glc
Forum Administrator
Staff
Premium Member
 
glc's Avatar
 
Join Date: May 2000
Location: Joplin MO
Posts: 37,791
You have to physically remove the card.
glc is offline   Reply With Quote
Old 05-13-2005, 09:12 AM   #6
Member (9 bit)
 
hoemee's Avatar
 
Join Date: Jun 2001
Location: Maine
Posts: 310
That's the kicker - there is no card physically installed, all I have on this mobo(which is a GA-586HX) is the video card. All other slots are open.
hoemee is offline   Reply With Quote
Old 05-13-2005, 12:28 PM   #7
Member (8 bit)
 
Join Date: Apr 2005
Posts: 207
Something you might want to try is to boot to a DOS prompt and run scanreg /restore. A list of dates will be shown that should restore your registry to a known good start.

If that fails sometimes such errors can be eliminated by doing a registry search and deleting the offending key. I`d try a search for VDHCP(03) and delete any entries that come up.

It goes without saying I`m sure that no registry modifications should be done without a full backup of the system unless you know exactly what you are doing.
Digitalic is offline   Reply With Quote
Old 05-13-2005, 03:01 PM   #8
glc
Forum Administrator
Staff
Premium Member
 
glc's Avatar
 
Join Date: May 2000
Location: Joplin MO
Posts: 37,791
Look in add/remove programs - the Windows setup tab, communications. Uncheck dialup networking and virtual private networking if they are checked. If it wants to copy files, tell it to skip unless it finds the files by itself.
glc is offline   Reply With Quote
Old 05-13-2005, 09:52 PM   #9
Member (9 bit)
 
hoemee's Avatar
 
Join Date: Jun 2001
Location: Maine
Posts: 310
Got it - went into safe mode - and removed all network adapters. System now boots up fine - and does not hang up on shutdown. It still does count the ram 3 times before booting....any ideas?

Thanks GLC and others
hoemee is offline   Reply With Quote
Old 05-13-2005, 11:41 PM   #10
glc
Forum Administrator
Staff
Premium Member
 
glc's Avatar
 
Join Date: May 2000
Location: Joplin MO
Posts: 37,791
The ram count is a bios setting. You need to enable quick boot.
glc is offline   Reply With Quote
Old 05-15-2005, 09:47 PM   #11
Member (9 bit)
 
hoemee's Avatar
 
Join Date: Jun 2001
Location: Maine
Posts: 310
I made the change in the BIOS and it fixed it - thanks again GLC
hoemee is offline   Reply With Quote
Reply

Bookmarks

Still Need Help? Type Your Keywords Here:


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -5. The time now is 10:28 AM.
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2012, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.0 PL2