|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
01-12-2002, 11:36 AM
|
#1 |
|
Member (6 bit)
Join Date: May 1999
Location: TN.
Posts: 48
|
XP Multi-boot question (Boot.ini)
When I first installed XP I had set it up so I could boot to either XP or Win98, but now I want to only boot to XP (I got rid of my win98 partition) here is my boot.ini file. Do I need to just delete it or modify it?
(the xp partition info is correct) Thanks, [boot loader] timeout=30 default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS [operating systems] multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /fastdetect C:\="Microsoft Windows" |
|
|
|
01-12-2002, 09:21 PM
|
#2 |
|
Member (13 bit)
Join Date: Sep 1999
Posts: 4,954
|
Just backspace on the C:\=Microsoft Windows,after erasing that one line,click on, file, click on save and reboot,it's gone!
Just make sure that's all you remove. |
|
|
|
|
01-13-2002, 12:05 AM
|
#3 |
|
Power in the Box-P4 XEON!
Join Date: May 2001
Location: Europe >Swiss
Posts: 3,014
|
Boot.ini is marked READ ONLY you have to unmark this in the properties first..
Or use START RUN MSCONFIG click OK select Boot.ini and remove the entry...
__________________
It's not as hard to do as you may think...It's just that you try.!And I'm still trying..! The Machine: i7 920CPU @ 2.66 Hypertreading / Asus P6T / 12GB DDR3 Ram 1366 / 3 x Sata 160GB Hot Swap / 1x Sata 160GB / 2 x Sata 300 GB / Plextor DVD 800 SATA / Plextor CDRW IDE / Audigy Sound Blaster 24 Bit / ASUS Nvidia ENGT 240/ Chieftec Full Tower / PSU Chieftec 600 Watt / Win7 x64 Ultimate MAPS |
|
|
|
|
01-13-2002, 01:00 AM
|
#4 |
|
Member (5 bit)
Join Date: Jan 2002
Location: Virginia
Posts: 21
|
Set the timeout to 0 that way it will go directly into XP
L8R |
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
