|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
01-15-2003, 05:51 PM
|
#1 |
|
Member (7 bit)
Join Date: Dec 2001
Location: Rome, GA
Posts: 83
|
pci universal serial bus
i just put a computer together and in windows 98 se in the system\device manager there is an alert for "Other Devices"
the componetes are as follows: p4 2.4 ghz 533 fsb albatron mobo px845pev pro radeon 9000 pro 256 mb pc 2700 ram 40 gb wd caviar hdd 7200 rpm windows 98 se he says he has downloaded all the updates for windows so that is done. however the motherboard does have two additional headers for front of the case usb ports, wich we did not use because the case does not have the front ports built in. i think that may be the problem. if it is would i just need to disable the ports in windows, or in the bios? |
|
|
|
01-15-2003, 06:41 PM
|
#2 |
|
Member (7 bit)
Join Date: Dec 2001
Location: Rome, GA
Posts: 83
|
are there any drivers avalible for usb 2.0 for windows 98?
|
|
|
|
|
01-15-2003, 07:30 PM
|
#3 | |
|
Member (14 bit)
Join Date: Mar 1999
Location: Kelowna, B.C., Canada
Posts: 9,138
|
You should be able to turn them off in BIOS, or run the install program from the motherboard CD.
Direct from everythingusb.com: Quote:
|
|
|
|
|
|
01-16-2003, 06:46 AM
|
#4 |
|
Member (7 bit)
Join Date: Dec 2001
Location: Rome, GA
Posts: 83
|
ok i understand. but where to get the drivers for the 2.0 in windows 98? they have to have some out and where? the drivers are not on the cd for the motherboard i already tried that.
|
|
|
|
|
01-16-2003, 09:45 AM
|
#5 |
|
Member (14 bit)
Join Date: Mar 1999
Location: Kelowna, B.C., Canada
Posts: 9,138
|
There are no USB 2.0 drivers for Win98, unless the manufacturer of your PCI USB card has some. (unlikely).
|
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
