|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
01-17-2003, 04:25 PM
|
#1 |
|
Member (1 bit)
Join Date: Jan 2003
Posts: 1
|
Conflict I/O Port: 2F8
I have a 200MX computer with win98. When I start it gives my error message: Conflict i/O Port: 2F8
What is the problem and what can I do? I was working before I did some cable swapping etc. I tried to put back into original config but obviously something is this amiss. Thank a erhard annerhard@yahoo.com |
|
|
|
01-17-2003, 04:58 PM
|
#2 |
|
Member (13 bit)
Join Date: Oct 2000
Location: Scotland
Posts: 4,700
|
Hi a erhard,
It looks as though you have a IRQ confict with your COM 2 port(Serial port). What sort of modem do you have - ISA, PCI or External Serial Port modem. Go into Device Manager>Ports>COM 2>Right-click>Properties>Resources and see if there is conflict with another device. If your not using an external serial modem, you could try disabling COM 2 in the BIOS. HTH |
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
