|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
06-08-2003, 08:39 PM
|
#1 |
|
Member (10 bit)
Join Date: Jul 2002
Location: Ohio
Posts: 521
|
boot up problem
Windows 2000 SP3
P3 600 256MB pc100 WD 40gig IDE 250watt psu So Ill turn on my work computer and it will sit at the micron.com screen for about 12 sec's and will (beep.... beep beep) It says HD error, press f1 to reboot or setup some thing like that. Ill just do a hard boot and it will sit at the screen for like 12 sec's and will boot into windows... It only does it (that i seen) when the system is off and I do a cold boot. Does not do it on restarting.. The system came with 98se and I put in a new harddrive and then windows 2000 |
|
|
|
06-09-2003, 11:37 AM
|
#2 |
|
Forum Administrator
Staff
Premium Member
Join Date: May 2000
Location: Joplin MO
Posts: 37,791
|
Bad IDE cable, hard drive failing, weak power supply. Reseat the IDE cable, try a different one, run WD Data Lifeguard diags on the hard drive, try a different power supply.
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
