|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
06-11-2003, 05:23 PM
|
#1 |
|
Member (11 bit)
Join Date: May 2003
Location: Brooklyn, NY
Posts: 1,798
 |
Instaling OS Problems
Well i built a pc went to put win 98 on and i get errors when im instaling it here's a list of the errors i get,
MSGSRV32 REGSVR32 SUWIN CAUSED A PROTECTION FAULT IN MODULE SETUPX.DLL AT 004:5AFB I've tried using different hardrives,reset the cmos, with no luck here's the specs. Vega mainboard P3 933mhz western digital 60g hardrive Help would be greatly apprechiated Thanks, Frank
__________________
Xaser III AMD 2400+ (no time to mess around with OC'ing) Abit NF7-S 420w Enermax Noisetaker Radeon 9800 PRO 80g Seagate 60g Westarn Digital 512 megs OCZ Enhanced latency PC3200 2-2-2-3 Swiftech MCP-650 Swiftech 6002A And a Transmission cooler Temps- 28C idle and load even @1.8v Pics- (the first 6 are new ones) http://photobucket.com/albums/v231/-FLG-/ |
|
|
|
06-11-2003, 05:50 PM
|
#2 |
|
D'oh!
Join Date: Mar 2002
Location: Brooklyn, NY
Posts: 1,359
|
Frank,
Try swapping the video card, mobo, psu, and ram.... Hope that help
__________________
" You can go a long way with a smile. You can go a lot farther with a smile and a gun. " -Al Capone AMD Athlon 64 3500+ Orleans Core 2.2Ghz , Asus M2N-SLI Deluxe, Corsair XMS2 1GB (2x512) DDR 2 PC6400, 2 Western Digital 80gb 8MB Cache HDD, Xclio GoodPower 500w PSU, PowerColor X800GTO 256 MB GDDR3 256bit Enermax Case |
|
|
|
|
06-11-2003, 06:12 PM
|
#3 |
|
Member (12 bit)
Join Date: Jan 2002
Location: Central Arkansas
Posts: 2,170
|
What memory are you using?
__________________
Roger "Our greatest glory is not in never falling, but in rising every time we fall." -Confucius |
|
|
|
|
06-11-2003, 08:16 PM
|
#4 |
|
Member (11 bit)
Join Date: May 2003
Location: Brooklyn, NY
Posts: 1,798
|
192 megs of SDRAM
|
|
|
|
|
06-11-2003, 08:18 PM
|
#5 |
|
D'oh!
Join Date: Mar 2002
Location: Brooklyn, NY
Posts: 1,359
|
How about the brand Frank?
|
|
|
|
|
06-12-2003, 09:49 AM
|
#6 |
|
Shiro Usagi
Premium Member
Join Date: Sep 1999
Location: Kaneohe, Hawaii
Posts: 34,002
|
SUWIN errors usually points to defective RAM, but try another IDE cable first. If that doesn't help, then swap out the RAM.
 Cricket
|
|
|
|
|
06-12-2003, 01:00 PM
|
#7 |
|
Member (11 bit)
Join Date: May 2003
Location: Brooklyn, NY
Posts: 1,798
|
Ok i swaped out the RAM like you said i dont get the SUWIN error anymore but i still get the other two errors, i get the msgsrv32 when windows is detecting non plug and play hardware.
|
|
|
|
|
06-12-2003, 01:28 PM
|
#8 |
|
Shiro Usagi
Premium Member
Join Date: Sep 1999
Location: Kaneohe, Hawaii
Posts: 34,002
|
With Win9x OS'es, I'd install the OS without any PCI cards installed (sound, modem, NIC, etc...)...just the motherboard, CPU, heatsink, video card, RAM, floppy, hard drive and CD-ROM drive.
After the OS is installed fully (with all related motherboard chipset drivers properly installed), then install the PCI cards one at a time, install the driver and make sure it's working properly before you install the next card. Cricket
|
|
|
|
|
06-12-2003, 03:38 PM
|
#9 |
|
D'oh!
Join Date: Mar 2002
Location: Brooklyn, NY
Posts: 1,359
|
I'd go with Cricket on this one FLG, but on a side note, is your video card built in to your motherboard? Did you try to swap the motherboard?
Hope That Helps Joe |
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
