|
|||||||
![]() |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
|
|
#1 |
|
Member (7 bit)
Join Date: Dec 1999
Location: Durango,colorado,USA
Posts: 114
|
My daughters computer suddenly will not boot Windows XP.It will get as far as loading drivers then it will reboot.no matter which way I pick for it to start, safe mode, safe mode with command ,ect it will just keep rebooting.it gets as far as windows\system32\agp 440.sys then stall & reboot.is there any way short of repartitioning to fix this??as mentioned before it was fine one day and dead the next..thanks Dave
|
|
|
|
|
|
#2 |
|
Member (10 bit)
Join Date: May 2000
Location: PA USA
Posts: 1,004
|
Set your BIOS to boot from CD first, boot with your XP CD in and choose the repair option. See if that helps. Also, if you can get into system restore you might try going back to before the trouble started.
Trudy
__________________
#1 HP 5310 500Hard Drive 350gb.Toshiba external back-up 4gb. Ram Win.7 Home Premium 64bit. #2 Sony Lap Top 500 gb. hard drive 3.0ghz AMD Athlon 4gb Ram Win.7 Home Premium 64 bit |
|
|
|
|
|
#3 |
|
Member (12 bit)
Join Date: Dec 2002
Location: essex
Posts: 2,252
|
have you tryed last known good configaration from the boot menue ?
__________________
Join the PcMech.com Folding@Home Team and Help Save Lives! Click Here! Life only looks greener on the other side of the fence |
|
|
|
|
|
#4 |
|
Member (12 bit)
Join Date: Nov 1999
Location: San Francisco
Posts: 2,436
|
That happened to my son. It turned out to be a bunk mobo w/bunk RAM. Two distinct problems. But the problems were intermittent and very hard to diagnose!
|
|
|
|
|
|
#5 |
|
Member (7 bit)
Join Date: Dec 1999
Location: Durango,colorado,USA
Posts: 114
|
andyms18a, I tried boot from last known good configuration but it still hangs up & reboots.
trulad,I will try boot from CDrom option,I hadn't thought of that Thanks..At this point i can't get into system restore RayH, Thanks,I will check those out also |
|
|
|
|
|
#6 |
|
Member (12 bit)
Join Date: Dec 2002
Location: essex
Posts: 2,252
|
this link may help you fix the problam http://support.microsoft.com/default...b;en-us;307545
|
|
|
|
|
|
#7 |
|
Member (7 bit)
Join Date: Dec 1999
Location: Durango,colorado,USA
Posts: 114
|
thank you andyms18a,I will check it out.booting from cdrom won't work because it hangs up before any thing is powered up..Dave
Last edited by borax56; 07-27-2003 at 11:46 AM. |
|
|
|
|
|
#8 |
|
Member (12 bit)
Join Date: Dec 2002
Location: essex
Posts: 2,252
|
if its hanging when you boot from cd rom then you have a hardwair problam its eather cpu, ram, psu, or mother board, or the cable from the mother board to the cd/hard drive can you boot to the bios and set safe defults then go to the cpu setings and note your systom temps and fan speed also if you have 2 sticks or moor of ram remove al but one and test by booting test all the ram one at a time if you cant boot with any of the ram then can you test the ram in anothe computer just to make shore its ok
|
|
|
|
|
|
#9 |
|
Member (7 bit)
Join Date: Dec 1999
Location: Durango,colorado,USA
Posts: 114
|
got it to boot from cdrom but it says no hard drive is detected! I think the mobo is at fault,(hard drive is not very old)so now I guess i will build my daughter a new system.this one is an old slot 1 p3..thanks to everyone for their help..Dave
|
|
|
|
|
|
#10 |
|
Member (12 bit)
Join Date: Nov 1999
Location: San Francisco
Posts: 2,436
|
Can you put the hard drive in another computer? Maybe it went south. If it's farily new and dead, you may be able to RMA.
|
|
|
|
|
|
#11 |
|
Member (7 bit)
Join Date: Dec 1999
Location: Durango,colorado,USA
Posts: 114
|
Yes RayH I will try that,thanks
|
|
|
|
![]() |
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|