|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
10-28-2003, 07:26 PM
|
#1 |
|
Member (11 bit)
Join Date: Oct 2001
Location: lometa,tx.
Posts: 1,399
|
hangs on welcome
just finished a new build,intel 1.6-intel d850mv,sparkel 300w,256 kingston rambus.
problem,it did fine during setup,installed several things and suddenly started hanging on the welcome screen,i deleted all the software except nero and it still does it.when the welcome comes on there is one beep then hangs, if i alt,ctrl,delete it continues with no problems.by the way i have xp home with sp1 installed.
__________________
claude intel d850mv 1.6a 512 rambus ATI8500le solid as a rock. intel e5200 2.5 P5KPL-CM 2 gig memory also solid |
|
|
|
10-29-2003, 12:42 AM
|
#2 |
|
Member (9 bit)
Join Date: Mar 2000
Location: Lesmurdie , W . A . Australia .
Posts: 342
|
Beep codes .
http://home.wxs.nl/~hjmeijer/PCKnowl...BeepCodes.html http://www.pchell.com/hardware/beepcodes.shtml http://www.pcguide.com/ts/x/sys/beep/index.htm http://www.butterwick0.freeserve.co....shoot/ts8.html http://www.pcguide.com/ts/x/sys/beep/award.htm 1 Long Beep: Memory problem Explanation: There is a failure of some sort related to the system memory. Diagnosis: The first bank of memory probably has a failure of some sort; this is usually just a physical problem such as an incorrectly inserted module, but may also mean a bad memory chip in a module. It is possible that there is a failure related to the motherboard or a system device as well. |
|
|
|
|
10-29-2003, 12:33 PM
|
#3 |
|
Member (11 bit)
Join Date: Oct 2001
Location: lometa,tx.
Posts: 1,399
|
i thought it might have something to do with using the MB cd so i restored back to before i installed that and sure enough it fixed it,NOW what i am wondering is it necessary to use the MD cd with xp? it seems to run very well without that install.
|
|
|
|
|
10-29-2003, 12:41 PM
|
#4 |
|
Member (12 bit)
Join Date: Sep 2001
Location: Racine, WI
Posts: 2,094
  |
You don't have to use the CD supplied by Intel, because XP has its own set of drivers for that hardware. You could, however, load one driver at a time, to isolate the problem. That or get the latest from intel's web site.
|
|
|
|
|
10-29-2003, 01:39 PM
|
#5 |
|
Member (11 bit)
Join Date: Oct 2001
Location: lometa,tx.
Posts: 1,399
|
i got a cd with the MB D850MV it has several drivers on it ntf etc do i need to use those drivers or just let xp use it's.maybe that is what you said n8 but i just want to make sure.
|
|
|
|
|
10-29-2003, 01:44 PM
|
#6 |
|
Member (12 bit)
Join Date: Sep 2001
Location: Racine, WI
Posts: 2,094
|
You can just use the windows drivers. I think for intel boards, they are pretty good, anyway. Its when you get into off brands that you start running into troubles.
|
|
|
|
|
10-29-2003, 02:06 PM
|
#7 |
|
Member (11 bit)
Join Date: Oct 2001
Location: lometa,tx.
Posts: 1,399
|
thanks a lot,that was what was causing the problem and i was hoping i wouldn't have to use them.
|
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
