|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
01-26-2001, 10:45 AM
|
#1 |
|
Member (9 bit)
Join Date: May 1999
Location: TX
Posts: 341
  |
I'm installing win2k over a windows 98 installation on an Intel DK440LX mainboard. It has an onboard Adaptec 7895 SCSI Host Adapter. When I did the install it told me that It didn't recognize the SCSI controller and I'd have to provide drivers. So I booted into win98 and looked in the properties and found that it had a 2940 series Adaptec controller. This must be the wrong one, tho, because I get the inaccessible boot device error. I need to change the driver, but 1) I don't know how now and 2) there is no driver on the adaptec site for a 7895 SCSI host adapter. On the intel site, they only have the driver for NT 4.0. Can I use this driver ?
__________________
-Lane- "That's no scrap heap, that's our network" |
|
|
|
01-26-2001, 10:58 AM
|
#2 |
|
Member (9 bit)
Join Date: May 1999
Location: TX
Posts: 341
|
The microsoft site says the AIC-7895 controller driver is included on the win2k cd. Now that I know what the right driver is, how do I find it and get it where it belongs?
|
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
