|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
12-26-2002, 10:39 AM
|
#1 |
|
Member (11 bit)
Join Date: Jun 1999
Location: Memphis, Tn
Posts: 1,828
|
cpu fan monitor
For those that don't know, some motherboards (the one that prompted this post was a Shuttle MK32N) require a cpu fan with a rpm monitor to be plugged into the corresponding connector on the motherboard. The reason for this is that the bios gets more intelligent with every generation and, with the latest, if there is no rpm monitor the mobo thinks that the cpu fan has quit and shuts down the mobo to prevent damage. These must be plugged in to the cpu fan connector. Case fan and system connector will not do the trick even tho the fan works.
__________________
Carl Have you noticed? Despite the high cost of living it is still the most popular option available. Integrity is it's own reward! The rarest animal in the world is a liberal using his own money. It is easy to be a liberal when the result of your politics still leaves you very well-off. Try letting all that spending hurt and you'll see how many folks are for it! |
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
